36 Produkte

What does the nanofilm include?

  • When you order one nanofilm, you get a one-digit sticker. You can add the necessary symbols to the cart on website.

What happens if the nanofilm is scratched?

  • It is quite difficult to damage the Ecoslick® sticker because it is attached very firmly, forming an almost inseparable bond with the license plate. Even if there are scratches, it will be very difficult for the speed camera to determine which symbol is covered.

What happens to the nanofilm after washing?

  • Ecoslick nanofilm is not afraid of washing, any type of car wash. The film is almost impossible to tear off with water pressure. Therefore, be extremely careful and precise when gluing.

Is it necessary to put a film on the rear license plate of a car?

  • Depending on the terrain, speed cameras may be located in two directions and will record your car from both sides. We recommend gluing the film on both sides.

How is Ecoslick® nanofilm installed?

  • The sticker should be applied very carefully, since it will be impossible to change the position of the pasted film - it fits tightly to the surface of the number. You can see visual instructions on our set up page.

How many symbols are best covered with film?

  • The more symbols are hidden under the nanofilm, the less opportunities there are to decipher the number from the camera recording. It is recommended to cover all front and back license plates symbols.

How long will nanofilm last?

  • Ecoslick® film is designed for many years of use, since it is created from durable, wear-resistant materials designed to withstand difficult weather conditions, temperature changes and varying degrees of mechanical impact. The warranty period is 5 years.

What is the difference between an infrared flash and a camera flash?

  • Infrared light is highly focused rays that are invisible to the human eye and are different from the bright flash of a camera. It is in the infrared spectrum that automatic speed cameras operate. It is against this spectrum that Ecoslick® film acts.

What does the camera see when using nanofilm?

  • The camera only sees the illuminated area where the symbols are hidden under the Ecoslick® stickers, which blends into the white background. Accordingly, the digital system does not recognize the number and does not record it in the database of traffic violations. There is no one to give a fine!

Does nanofilm work during the day?

  • The infrared beams of speed cameras work both day and night.

Why should I buy your product?

  • Our Ecoslick® nanofilm is manufactured in Germany and is therefore reliable and effective. All numbers and symbols comply with the national standards of each country. We also provide a guarantee when purchasing a complete set of nanofilm, and if a fine is imposed, we undertake to pay it. On the market you can find offers with a suspiciously low price - accordingly, such a film will not protect you from the eyes of a traffic cop or simply will not fit the size of your license plate.

Kollektion: Argentina 2014

In today's world, protection against traffic cameras and radar is becoming more and more popular among car owners. Especially in countries with an active use of automatic control systems, such as Argentina. If you are looking for protection for your license plates, anti-radar stickers will be a great solution. Our store offers Argentina 2014 license plate stickers that will not only protect you from unwanted fines, but also keep your car looking aesthetically pleasing.

Mercosur license plates 2014: what are they?

As of October 2014, Argentina began registering cars using the new Mercosur license plates. These plates are standardized for all countries in the bloc, such as Brazil, Uruguay, Argentina and Paraguay. License plates Mercosur Argentina are distinguished by their design and the introduction of new alphanumeric combinations. Our anti-radar stickers are designed specifically to protect these license plates, providing maximum invisibility to cameras and radar.

Advantages of using anti-radar stickers

  • Protection from cameras and radar: Automatic speed monitoring systems are widely used in Argentina. Anti-radar stickers for cars will provide reliable protection against such devices, making it difficult for them to operate.
  • Aesthetically pleasing and durable: Our products keep the look of the license plate unchanged while providing complete protection. Car accessories Argentina license plates 2014 are designed with the new Mercosur standard in mind.
  • Quality materials: All our anti-radar stickers are made from high quality materials, guaranteeing long life and resistance to external influences.

Argentina 2014 anti-radar license plate sticker installation instructions

Proper installation of Argentina anti-radar license plate stickers is important for their effective performance and long-term use. These vehicle stickers, designed specifically for license plates Mercosur Argentina, are easy to install, but it is important to follow the step-by-step instructions to ensure that the sticker is placed correctly and provides maximum protection from radar and cameras.

Follow these simple steps for installation:

  1. Prepare the surface: Before you begin installation, make sure the license plate is clean and dry. Any dirt or moisture can reduce the effectiveness of the adhesive layer and result in an unreliable attachment. Use a soft cloth and cleaner to thoroughly remove dust, dirt and grease stains.
  2. Inspect the sticker: Open the package and inspect the anti-radar stickers for damage or defects. Our Nanofilm material stickers offer resistance to damage, but it is always important to make sure the product is in perfect condition before installation.
  3. Apply the sticker to your license plate: Carefully remove the protective film from the license plate sticker and place it directly on the center of the license plate, using even lines for proper orientation. Apply the sticker evenly, starting on one side and gradually smoothing it over the entire surface to avoid air bubbles.
  4. Smooth the surface: Use a plastic spatula or soft cloth to gently smooth the sticker over the license plate. This will help remove any air pockets that may exist and ensure that the sticker adheres tightly to the surface, which is important for effective protection from cameras and radar.
  5. Wait for adhesion: Allow time for the sticker to fully adhere to the surface - this usually takes 24 to 48 hours. Avoid exposure to water or heavy friction during this period so that the adhesive has time to set securely.

For more detailed information and to view the original installation guide, you can read the instructions here.

By following these instructions, you will be able to properly install the Argentina anti-radar license plate stickers and enjoy all their benefits, such as radar protection and long-lasting coverage thanks to the high quality Nanofilm.

Where to buy antiradar stickers for Argentina 2014?

If you need to buy anti-radar stickers for your car, check out our online store. We offer car protection accessories specifically for license plates Mercosur Argentina that meet the latest standards. Our license plate stickers Argentina 2014 will not only help you protect your car but also keep it looking stylish.

Visit our website Alite.cc and discover the latest solutions for radar and camera protection in Argentina!

Show more ↓

Kaufen 4 symbole und ERHALTEN 10% AUS

🥳 Herzlichen Glückwunsch! Sie haben 30% RABATT

Choose products

Gesamt: 0 artikel

$0.00 $0.00

Mindest. Bestellen Sie 2 PCs Auschecken